Pages

Ribbon and flowers ballet pump tutorial

Sunday, July 24

Hi everyone. The sun is out in full force today in London, and I am sooooo very happy. I decided to offer a little tutorial in celebration of this rare occurrence of sunshine.

On Friday during my lunch break, my colleagues and I went into Uxbridge city center to look around for things we might like to buy when we get paid ( pockets are quite bare presently). While they briskly marched into Debenhams and Clarks, I made my way into Oxfam (that's my level you see).

I came out with a brand new pair of blue French Connection pumps, which I bought for £6.99. I really loved the colour, but felt it was too plain. So I decided to do something about that. So I refashioned it into this......




Tutorial

You will need:

1) A pair of pumps, new or old
2) A leather hole puncher
3) Ribbon
4) Fabric flowers ( I used suede flowers. This is optional)
5) Super glue


1) Starting from the back seam, measure and mark 1" on both sides of the seam. Then increase the spaces by
     2" until you get to the front. The front will have two marks.

2) Using the leather hole puncher, create holes in the pumps by punching through the leather.




3) Starting from one of the holes from the front, pass the ribbon through the holes. Each side will have two lines of ribbon.



4) To prevent the ribbon at the back seam from showing when wearing the shoes, use supper glue to glue it to the inside of the shoes. Use just a tiny amount of glue.





5) You should now have the ribbon round the shoes like this. Trim the excess ribbon.


6) Make a bow with the loose ends of the ribbon. You might decide to stop here, and wear the shoes like this. If you decide to use flowers like I did, go on to the next step.


7) Using super glue, glue the flower to the shoes. Placing it carefully on top of your bow, so that the ends of the ribbon show as well.











And that is it!!

Have a nice Sunday everyone, and do not forget to enter the Pattern Magic 1 & 2 giveaway, which ends on July 31st.
Posted by Picasa

Simple Lace sandal DIY

Monday, April 25

I'm back in London!! Yay!!!

It feels so good to be back in my own home, staring at my lovely sewing machine. I wanted to sew a dress, but I was so tired, so I decided to do a little DIY on my pink sandals.



Before



So you need: sandals, lace trimming, scissors, glue ( I used gutterman, though its not in the picture)

Measure the length of the area you want to cover, and apply some glue to it.
Next, place your lace trimming over the glue. Do this for both legs. Fold the lace trimming inwards at the edges.
After

And its done.
Go out into town and strut your stuff.
This should take about 5 minutes maximum, including drying time for the glue.
Dodgy looking legs right?




Take care everyone.

xoxo

Dibs